AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Stainless steel clips

28th April 1972, Page 58
28th April 1972
Page 58
Page 58, 28th April 1972 — Stainless steel clips
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A series of stainless steel worm drive hose clips marketed by Circlex Marketing offers an ex-stock choice of 11 standard sizes covering a closed-down diameter range of between 12mm and 110mm. The uniform threading action allows fast, fitting with full and even circumferential compression. Marketed by: Circlex Marketing Ltd, Brook Way, Kingston Road, Leatherhead, Surrey.

"push-pullsystem of electr feed. Each machine is supp as a complete, individu tested unit and consists of tF main parts, the power soul electrode feed Unit and welc gun with hose, carried or four-wheel chassis which space for a gas cylinder.

The A9 electrode-feed sys. permits appreciably Ion welding hoses than non! push-feed systems. The stanc welding hose is 5m (16.4ft) I but hose lengths up to 1 (52.4ft) can be used.

Arc voltage is set by mean a switch on the 'power sou whereas the current — whic proportional to the electrc feed speed — is set by mean a knob on the welding gun. current can, therefore, easily adjusted during welding.

The welding gun is a stra barrel type and has a bui compressed-air turbine m, which pulls the electrode together with the electric m in the feed unit gives, ii claimed, smooth, positive feed. For welding in "diffic to-get-at" joints, the gun car fitted with a swan neck wl can be rotated through 360 ( The electrode feed speed is by, rotating a small k mounted at the front of feed-mechanism housing. compressed air for the turl motor is also used for coc purposes.

Made by: Esab Ltd, Gillingh Kent.

Tags

Locations: Surrey, Kingston

comments powered by Disqus