1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152 
Bids and DeVilbiss for a smooth finish
27th June 2002, Page 24
27th June 2002
Page 24
Page 24, 27th June 2002
— Bids and DeVilbiss for a smooth finish
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Keywords :
Pumps, Physics, Diaphragm Pump, Engineering, Fluid Dynamics, Diaphragm, Mechanical Engineering
• To achieve superior paint finishes and boost efficiency, DeVilbiss recommends matching its Gifi spray gun equipment with the Binks DPP diaphragm pump range.
There are four Binks pumps to choose from: wall, floor or pail mounted, or a wheeled cart. They are all based upon its Infinity double-diaphragm 1:1 ratio pump.
Being self-priming it starts immediately and will not be damaged if the material runs out.
For an extended service life the pumps use Teflon diaphragms with stainless-steel
seats and balls. MTAT111111 flow rate is 26.5Iit/min at 1.0-6.9 bar; the pumps come complete with ten BSP air connectors.
CV finishers using the Binks/DeVilbiss combination include Warrington bodybuilder Marsden Vanplan.
• Contact: 01202 571111.
Tags
People:
Marsden Vanplan