AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Coloured Plastics A NEW range of coloured gel coats in

26th May 1961, Page 71
26th May 1961
Page 71
Page 71, 26th May 1961 — Coloured Plastics A NEW range of coloured gel coats in
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

15 standard colours for reinforced polyester laminates is being introduced by the Plastics Colour Division of Ferro Enamels, Ltd., Wombourn, Wolverhampton. These new gel coats, for which a free colour matching service is available, are intended for spray and brush application. For spraying, the coats are thinned to the desired viscosity with acetone.

Maximum pigment concentration is claimed for the Ferro gel coats and this is said to give full coverage of the mould with a thin application. All the solids and resins are intimately mixed to minimize voids in the cured gel coat, thus simplifyingfinishing operations.

Tags

Locations: Wolverhampton

comments powered by Disqus