1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196 
Tough torquing $U
25th January 2001, Page 21
25th January 2001
Page 21
Page 21, 25th January 2001
— Tough torquing $U
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• The features of Norbert SL2 Slimline Yin-drive torque wrench include a robust twoway ratchet head to suit with right and left-hand threads; a torque adjuster that freewheels when closed to avoid accidentally changing the setting; and a clear signal when it reaches the pre-set figure.
The 5L2 also has its torquemeasuring device contained within its handle rather than relying on an external lever arm.
The Slimline range includes the 4.0-20Nm SLO with its ratchet or fixed head; the 8.054Nm SL1 which comes with X or in square drive; and the 5L2 which covers settings from 30150Nm of torque.
Combined with a flare or open-end fitting, the 1. or Yin drive SLO is said to be well suited for hydraulic pipe unions.
• Contact: 01295 270333.