AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

THERMAL KNIFE FOR SCREENS

25th January 1986
Page 57
Page 57, 25th January 1986 — THERMAL KNIFE FOR SCREENS
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

BECAUSE of increasing use of bonded windscreens in commercial vehicles, Kent-Moore Service Products Division has launched its own Thernial Knife.

The KM 4092 uses a heated blade to cut through the bonding adhesive and includes a built-in aspirator for the removal and filtering of smoke and fumes created during cutting. For the convenience and safety of the operator, the temperature setting control and on/off selector are located on the blade handle.

Over 3.5m of flexible conduit, containing the power and air-suction tube, is provided between the main unit and the blade, allowing the operator to work on large trucks and coaches. The KM 4092 conies complete with a selection of eight blades ranging from 16 to 63mm. plus a scraper blade, alien key and wire cleaning brush.

Kent-Moore UK Ltd 86 Wharfdale Road Tyseley Birmingham B11 2DD

Tags

Locations: Birmingham

comments powered by Disqus