Revision for a Roller
Page 14
If you've noticed an error in this article please click here to report it so we can fix it.
• Lawrence David has updated its Roller Sider easy-access curtainsider body which now follows the company's "all-bolted" assembly system.
The revised Roller Sider, which uses an electric motor to furl the curtains around a top roller, comes with all sections gal vanised or pre-painted. Other improvements include a new motor/gearbox with a lower power drain and an automatic cut-out to prevent over-torqueing.
Lawrence David is aiming the Roller Sider at the chilled distribution and dairy markets where quick side access is important but where good sealing of the curtains is a must. The Roller Sider curtains are retained on the bottom rave by a single locking pole, creating a clean outside finish.
The Roller Sider curtain system can be supplied on both rigids and semi-trailer up to 13.6m long