AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Welding generators

21th July 1972, Page 50
21th July 1972
Page 50
Page 50, 21th July 1972 — Welding generators
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

Stanelco-Thermatron Ltd has introduced a range of plastics sheet welding generators that is the outcome of a development programme launched some 21, years ago.

Known as the Apex II range, the generators are available as 800W, 2kW, 3kW, 7kW, 10kW, 15kW, 20kW and 30kW units, all of which are free-standing and supplied with coaxial feeders for connection to a wide range of weld-and-cut or clicking presses. Each unit is built into a small floor area cabinet, which is sealed to prevent contamination by airborne dust or dirt.

The units are suitable for operation at a stabilized frequency of 27.12 MHz or at 58 or 75 MHz to suit the needs of each application. And they are suitable for operation on a 380 /440V three-phase 50Hz supply as standard or, in some cases, 200-250V single-phase 50Hz. Equipment can be supplied that can be operated on other voltages.

Made by: Stanelco-Thermatron Ltd, 4 Elstree Way, Boreham Wood, Herts WD6 1SE.

Tags


comments powered by Disqus