Dodge pumps out the news
21st June 1980, Page 25
21st June 1980
Page 25
Page 25, 21st June 1980
— Dodge pumps out the news
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
DODGE TRUCKS have issued a service bulletin explaining to operators of 300Series vehicles fitted with the BS16 engine how to avoid internal damage to the pump governor housing caused by incorrect setting of the exhaust brake fuel shutoff valve linkage.
To set the linkage, rotate the adjusting screw A fully inwards. Using gentle hand pressure, push the link B — stop lever to relay lever — to the stop position until the mechanism bottoms inside the governor housing.
Rotate screw A outwards until it contacts the relay lever, release the linkage, and rotate A outwards a further full turn. Lock up the adjusting screw in this position.
Start the engine and check the correct operation of the engine stop.