1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156 
Tampering instructions bought on Internet
Page 26
If you've noticed an error in this article please click here to report it so we can fix it.
A LORRY DRIVER who admitted tampering with his speed limiter faces sentencing at crown court after his truck was involved in a fatal accident. The driver acquired tampering advice from the internet.
The operator of the vehicle, Buxton, Derbyshire-based haulier James Bradley, received an absolute discharge when he appeared before High Peak magistrates alongside the driver, David Furnival of Congleton, Cheshire. Both pleaded guilty to using a vehicle on the road when the speed limiter did not comply with the regulations.
Prosecuting, Rosemary Lake said that when the police examined the lorry in detail they found that the speed limiter had been tampered with and a switch fitted enabling it to be turned off. Furnival had admitted purchasing tampering instructions from the internet.
For Furnival, it was said that he accepted he had fitted the device, which enabled him to turn the speed limiter on and off when driving on motorways so that he could reach the 60mph limit.
His HGV driving licence had been taken away for 12 months by the Traffic Commissioner and he had been unable to gain employment since.
For Bradley, it was said he regularly checked his drivers' tachograph charts and had noticed on occasions that Furnival had exceeded 56mph, but that had been explained by the terrain.
In addition, his vehicles were regularly checked by a professional maintenance contractor, who had advised him that the speed limiter was working as it should be.
Bradley's 0-licence had been revoked, and the court heard
that as a result he had 'lost everything'.
Ordering Bradley to pay £100 costs, the magistrates said that they noted he had performed all the appropriate checks, including that for the speed limiter.
The magistrates sent Furnival to Derby Crown Court for sentencing, where he faces other charges relating to the fatal accident.