;crew clamp
17th August 1973, Page 55
17th August 1973
Page 55
Page 55, 17th August 1973
— ;crew clamp
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
he Destaco Ram-Lock screw amp features a release/engage Dilar for quicker clamping and
releasing of the workpiece. The collar is threaded to the clamp leadscrew which is slid through the clamp-mounting bracket until it approaches the workpiece. The collar is then run down the leadscrew and locked on to the bracket and the clamp then wound-in in the conventional way. To release the workpiece the clamp is disconnected from the bracket and the leadscrew slid back.
There are two basic units, one of 0.5in. diameter with 100mm travel, and the other 0.375in. diameter leadscrew with 75mm travel.
Made by: Insley Industrial Ltd, Eastern Road. Bracknell, Berkshire.