1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144 
N EW ranges of body repair equipment are now available from
Page 51
If you've noticed an error in this article please click here to report it so we can fix it.
Stenor Ltd. The first is a heavy-duty panel repair kit, the basis of which is a model 1500 Car Hammer. Through a patented metering trigger this allows a full adjustment of striking rates over a range of 0 to 3,840 blows per minute. A feature of this unit is its ability to punch countersunk holes for click rivets.
The kit is called the Quick Cutter and included is a well chosen set of cutters, a spot weld breaker, a punch holder and a countersunk punch tip, all contained in a strong metal case. The air consumption on full striking rate is 3 Cu. ft. p.m.
The second range comprises the Speed-eze air sanders, claimed to have no wearing parts. The extremely high speeds at which the discs revolve permit faster removal rates with finer grits, in turn giving a much finer finish and eliminating hand finishing of work. Three models are available—a clip-on orbital model; a model equipped with a 0.25 in. chuck which will accommodate sanding pads, rotary tools and wire brushes; and a disc sander.
Made by: Stenor Ltd., Richmond, Surrey.