AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Markerlight system

12th November 1971, Page 134
12th November 1971
Page 134
Page 134, 12th November 1971 — Markerlight system
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

From Thorn Lighting Ltd comes the Thorn Markerlight system which is in two distinct forms one for vehicle sides, the other for tail sections. Markerlights measure only 72mm in diameter and 22mm in thickness, and incorporate a specially developed form of Fresnal lens, for all-round viewing, which is bonded-sealed to the base, permanently enclosing the light source within a weatherproof, oil and petrol resistant, one-piece unit.

For vehicles sides, the Thorn Markerlight is available as a two-tone unit — one half red, the other white. Leftand right-hand versions enable push-in connections to be maintained at the base of the units.

Each Markerlight consumes only 3W in either 12 or 24V rating and a series of Markerlights can be supplied from an ordinary commercial vehicle battery system—loo around the vehicle with cabling required either concea or fixed to the surface.

The single-tone Markerligh1 designed for fixing to the ends trailer and truck end-sections use in addition to the exist standard stop and tail re lighting system.

Made by: Thorn Lighting I. Thorn House, Upper St. Mart Lane, London WC2H 9ED.

Tags


comments powered by Disqus