AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

A trigger operated valve from Spraying Systems Division for fluid

12th November 1971, Page 133
12th November 1971
Page 133
Page 133, 12th November 1971 — A trigger operated valve from Spraying Systems Division for fluid
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

systems up to 150 psi and flow rates up to 5.83 gpm can be incorporated in a fixed piping system to provide quick on-off control. It can be used as a hand-held control unit on portable systems, say, for vehicle washing. Inlet and outlet connections are 0.25in. female pipe thread, and a 0.375in. model is also available.

An unusual design advantage is that the trigger can be moved through 360deg and set at any angle in relation to the line of the pipe.

The valve is fitted with a trigger lock for use when continuous flow is required.

Marketed by: Spraying Systems Division, C.T. (London) Ltd, 3 Hobart Place, London SW1.

Tags

Locations: Hobart, London

comments powered by Disqus