AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Cap and Cooling System Tester A N improved version of the

12th June 1964, Page 57
12th June 1964
Page 57
Page 57, 12th June 1964 — Cap and Cooling System Tester A N improved version of the
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

AC Pressure Cap and Cooling System Tester is now available from the AC-Delco Division of General Motors Ltd. The new tester, the RCT-2, incorporates a cylinder-type pump in place of the rubber bulb used on the earlier RCT-I model, which makes it easier to build up the required test pressure. A further test adaptor is also included in the kit; this enables independent pressure relief valves to be tested in the same way as pressurized radiator caps, The Model RCT-2 k it comprises a wall rack, cap and radiator tester, special relief valve test " adaptor, two neck and cap assemblies, two radiator asserriblies, two radiator adaptors, a sealing block adaptor, gasket and heat resistant mitten and instruction sheets. It is available from all AC Delco service stations and factors. Made by: AC-Delco Division of General Motors Ltd., Dunstable, Beds.

Price: ,E4 15s, net (trade).

Tags


comments powered by Disqus