AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

PERKINS engines fitted with the latest cylinder head bolts with

11th September 1982
Page 12
Page 12, 11th September 1982 — PERKINS engines fitted with the latest cylinder head bolts with
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

integral washer face can be subject to increased loadings of up to 20 per cent if the cold torque setting is used where the head is tightened hot.

On Perkins T.63543, T.3544 and 6.3544 units currently employed in the Dodge Commando range, a revised cylinder head tightening sequence is recommended with the correct claMp load given as 142Nm (105lb/ft) when applied hot.

Tags


comments powered by Disqus