Kwik route to a cold welder
10th June 1993, Page 104
10th June 1993
Page 104
Page 104, 10th June 1993
— Kwik route to a cold welder
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
• JB Kwik is a version of J B Weld which sets in four minutes.
The fast drying version has a lower tensile strength and will only resist heat up to 160°C, compared with the original cornpound's 315°C. There is no price premium.
J13 products are now available from independent car accessory shops.
JB WELD 93 Phone (0753) 683311.
Fax (07531681419.
of balls to allow stepless ratcheting is possible.
If the clutch is overloaded the
ills will slip but the ratchet will )(r., usable again without a stripdown.
As the balls run on a circular track the centre of the ratchet can be left out, allowing it to pass over studs and long bolts.
An 8-19mm clutch drive socket set costs around £40.
TOOL CONNECTION 95 Phone (09261427570.
Fax (0926) 312650.