AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

New Telehoist tipper body

30th June 1984, Page 16
30th June 1984
Page 16
Page 16, 30th June 1984 — New Telehoist tipper body
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

THE Telehoist Cheltonian tipper duced 12 years ago as a package tipping gears and bodies were n axle loading for vehicles grossing Telehoist has now introduced a new all-welded body constructed in 854360 grade 5 OB high tensile steel throughout with floor and runner thickness 2.3mm, and side, headboard and taildoor panels of 2mm thickness.

Side and tail door panels have two horizontal vee section swages for improved stiffness, overcentre panel catches, and panel hinges which do not project beyond the side panel line. Standard body depth is 1' 3" with 1' 6" option, the top and bottom swung tail door pivots 6" above the side panel and is fitted with a single handle locking bar.

The new floor structure has a boxed side rave, full width rear crossmember and central outrigger.

The municipal version of the Cheltonian body has double dropsides and a removable

and bodyren9e was first intro. The purpose was to ensure that ot unmatched and to give correct between 6 and 8 tonne.

centre post. Builder's bolster, shovel clip, rope hooks and step are offered as extras on both versions of the Cheltonian body.

Tags


comments powered by Disqus