AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Edbro's nein tipper hoists

29th January 1983
Page 14
Page 14, 29th January 1983 — Edbro's nein tipper hoists
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

EDBRO has developed a range of tipper hoists for with its heavy duty rock-c ing bodies which will be fitt Volvo N10 dumper chassis Middle Eastern contractor.

Its screw-ended body req power to return it from its r mum tipping angle to the where gravity can lower it t horizontal. A double acting uses the last section for power return, so in ord( avoid having to fit the nece but vulnerable additional draulic piping, Edbro mounted the DK series ra the inverted position, whic quires only a minimum lens hose.

Edbro's latest range of comprises two models, with three or four stages, having a maximum tippini gle of 65 degrees, a lift car of 32 tonne, and the body k of 7.25m (23ft 10in) when extended.

The first of the new have been shipped with the (39ft 4in) steel bodies moL on sub frames ready for fitti the dumper chassis.

Tags


comments powered by Disqus