AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Remote Gearbox Layout from Vauxhall

26th April 1963, Page 50
26th April 1963
Page 50
Page 50, 26th April 1963 — Remote Gearbox Layout from Vauxhall
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

DRIVING arrangements for connecting the clutch to a remote gearbox form the subject of patent No. 912,627. (Vauxhall Motors Ltd., Luton, Beds.) Referring to the drawing, it will be seen that the engine and clutch unit (I) transmit the drive to the gearbox (2) which is evidently intended to be combined with the final drive unit at the rear. The driven plate of the clutch is mounted on a splined hub in the orthodox manner, and the drive is taken through a tubular sleeve (3) carried on a rearward extension of the crankshaft (4) by means of sleeve bearings. The sleeve (3) carries a universal joint (5) coupled to a short

n32 propeller shaft. This shaft is supported at its rear end by a ball bearing (6) and drives the gearbox through a second universally jointed propeller shaft (7).

Tags


comments powered by Disqus