MIGATRONIC ADDITION I An addition to the Migatronic range, the
25th October 1986, Page 129
25th October 1986
Page 129
Page 129, 25th October 1986
— MIGATRONIC ADDITION I An addition to the Migatronic range, the
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
Automig 185X, is a combined MIG, resistance and shrink machine, specially developed to weld
thin plate and eliminate burnthrough problems relating to the welding of old plate.
By means of a second welding output connection fitted with a torch, it is possible to weld pull nails or washers to a damaged panel and then use the machine's pull hammer to pull out the dent. The local heating attachment is used on small dents.
A dual voltage transformer allows connection to either 240 volt single-phase supply or three-phase 415 volt ac supply.
Migatronic Welding Equipment Ltd 3 Jubilee Drive Loughborough Leicestershire LE11 OXS