Payload charts
Page 61
If you've noticed an error in this article please click here to report it so we can fix it.
Four ready reference charts, facilitating immediate payload comparisons between operators' current equipment and equivalent high-strength /lightweight Monocoque tipper bodies, are featured in an eight-page leaflet published by Pengco Transport Systems Ltd, Peterborough.
The charts cover Monocoque body lengths from 10ft to 28ft and side heights from 1ft Bin. to 6ft 3in. and list their impressive payload capacities by both weight and cube. There is a chart for each of the four standard ranges—standard/lightweight and general/heavy-duty in steel or aluminium.
The leaflet also details the standard and optional equipment available and gives information about Pengco's tipper and bulk body design and development department, which offers a special advice service to operators.
Also available is a 20-page brochure which provides detailed information about the design, construction and operation of the market-leading Load-0Matic demountable systems.
The systems are applicable to all makes of two-, threeand four-axle rigid chassis vehicles and to drawbar and semitrailers, and covering all weight categories from 5 to 32 tons gross. The brochure describes the special features and the application possibilities of each system in general distribution, inter-factory /factory-depot; and mobile warehousing operations. Both brochures available from Pengco Transport Systems Ltd, Oxney Road, Peterborough, Northants.