AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Dunnspencer Bulkflo Ltd., liton Works, llminster, Somerset.

20th September 1968
Page 180
Page 180, 20th September 1968 — Dunnspencer Bulkflo Ltd., liton Works, llminster, Somerset.
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

TWO of the three Dunnspencer animalfeed/grain bulk vehicles shown are of the pneumatic-discharge type and are equipped with the company's hydraulically driven one-piece vibrating hopper, which is exhibited for the first time and ensures the complete clearance of material from the interior of the body. One of the bodies is a Bulk& Junior which is of light-alloy single-skin construction and has a capacity of 600 cu.ft.; it is mounted on a Seddon 13/4 chassis of 176in.-wheelbase and equipped with a rotary seal of 8in.-diameter, an X420 blower, full power take-off and Edbro 4LNS tipping gear.

The second body is also of light alloy but is of double-skin construction and has a capacity of 850 cu.ft. This is based on an Albion Reiver RE29BN chassis and features an Edbro 4LN tipping gear and full power take-off.

The third exhibit, a rigid bulker body, is mainly of single-skinned light-alloy but has twin centre-opening wrap-around doors of double-skin construction located above the tailboard. A heavy-duty floor provides for the carriage of sacked as well as bulk loads.

Tags


comments powered by Disqus