AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Cantilever lift that tucks away launched by Joloda Systems

19th October 1985
Page 24
Page 24, 19th October 1985 — Cantilever lift that tucks away launched by Joloda Systems
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A NEW CANTILEVER taillift that can descend vertically and then tuck tinder the chassis has been introduced by Joloda Loading Systems.

This vertical descent ability means that the tail lift can be used on vehicles that also load or unload from a dock. There is no gap because the lift tucks away under the floor.

The British-built lift is in one-ronne. I.5-tonne or twotonne capacities. Platforms can be in a variety of sizes and in steel, aluminium or a combination of both: The 1.5 tonne model typically weighs

just under 350kg, including the hydraulic oil and built-in under-run bumper.

The finished lift is shotblasted and primed with epoxy paint to prevent corrosion. Roll pallet stops and heated switch boxes are standard.

Tags


comments powered by Disqus