AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Heating the Air to Facilitate Starting

19th March 1929, Page 66
19th March 1929
Page 66
Page 66, 19th March 1929 — Heating the Air to Facilitate Starting
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

RELUCTANCE to start on the part O an internal-combustion engine may be due, in winter-time, to the low temperature of the air entering the carburetter, particularly when this factor is aggravated by the use of fuel of an inferior quality. A device intended to combat this difficulty has been introduced by Messrs. P. Well and Co., 89, Upper Thames St., London, E.C.4.

The body of the air-heater consists of a Metal canister containing steel" wool, which is held in place by a grid. The hose from the body to the nozzle is flexible. The latter is in two parts —namely, the fixed portion and the

840 adapter—which is supplied to suit the intake of the carburetter of the vehicle for which the heater is required. Obviously, it can be applied only when the air intake is of the open variety or when the user is willing to remove any fitting at the mouth of the carburetter.

In operation the device is placed vertically on a as ring or other heater, tintil the steel wool has reached the required temperature. The nozzle is next applied to the carburetter, and when the starting handle is turned the air drawn in is warmed by its passage over the hot material in the canister.

Tags

Locations: London

comments powered by Disqus