AT THE HEART OF THE ROAD TRANSPORT INDUSTRY.

Call our Sales Team on 0208 912 2120

Automatic Compression Variation

18th January 1963
Page 43
Page 43, 18th January 1963 — Automatic Compression Variation
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.

Which of the following most accurately describes the problem?

A SCHEME by which the compression it ratio of an engine can be made to adjust itself to prevailing speed is shown in patent No. 902,707. Intended mainly for two-strokes, the scheme uses a piston that can vary its effective length. (The British Internal Combustion Engine Research Association, 111-112 Buckingham Avenue, Slough.)

Referring to the drawing, the piston body is not fixed to the gudgeon-pin assembly but is free to slide over it within the limits of the top space (1) and a stop ring (2). According to the patent, the piston is practically free of mechanical stresses and can in fact be made of ceramic material. If the top space be inflated with oil, the piston will lengthen and vice versa. The oil pressure necessary to fill it is obtained from the inertia of the column of oil in the long bore (3) in the connecting rod. When the pressure rises (at late upstroke), the oil passes a non-return valve (4) and is stored by a spring-loaded accumulator piston (5).

On the downstroke the stored oil passes a valve (6) and enters the head space, thus lengthening the piston. A blow-off valve limits the maximum pressure. The piston is shortened by discharge orifices but the specification gives no details of these.


comments powered by Disqus