Power drills
17th August 1973, Page 57
17th August 1973
Page 57
Page 57, 17th August 1973
— Power drills
Close
Noticed an error?
If you've noticed an error in this article please click here to report it so we can fix it.
If you've noticed an error in this article please click here to report it so we can fix it.
From Skil comes Drive-R-Drills which can be used to drive or remove screws and nuts and cut threads as well as holes.
The drills incorporate a variable speed trigger system and operate in reverse also.
Models 1422H and 1424H have two geared speeds, double protection against motor burnout; they are double insulated. The larger 1924 H model has a 13mm drill capacity in steel and revs from 0.750 rpm and 0.1500 rpm depending on gear
selected. It weighs 2.6kg (5.71b) and is supplied with chuck key; side handle and 3mm wire. Marketed by: Skil (Great Britain) Ltd, 1B Thames Avenue, Windsor, Berkshire SL4 1QJ.
Tags
Locations:
Windsor