Spicer revises pumps
Page 11
If you've noticed an error in this article please click here to report it so we can fix it.
• Wolverhampton-based Spicer Clutch and Power Products — the distributor of Chelsea power take-off — has made revisions to its range of hydraulic pumps.
The new models give an increased maximum pumping capacity of up to 114 lit/min (25 gal/min) at 1,000rpm compared to previous models. They can be remotely or directlymounted to any six-bolt, or rear-mounted Chelsea, ZF, Drum or other proprietary PTO and are suitable for driving product pumps, tipping gear, compressors and winches.
The HP16-200, priced at ,2240, and HP16-250 at £245, have compact, cast-iron centre bodies with high flow characteristics. The cast iron body also gives increased protection from contaminated fluid and is particularly suited to severeduty applications.
Operating at pressures below 138 BAR (2,000psi), but with large displacement motors, the pumps require no increase in engine speed to provide the greater capacity,